UV Exposure Box Project – Part 2

I disabled the safety feature just for this shot. You are welcome.

This is the second part of my adventure building a UV Exposure box, in which as you can see, I actually finished the build. In the first part I made the structure and planned the electronics. This part covers a whole lot more, distributed over many weeks doing small things here and there. Read More

UV Exposure Box Project – Part 1

In my neverending quest of improving my homemade PCBs, I discovered that adding a soldermask to my boards is actually not a hard task, thanks to a relatively simple process that involves UV-curable paint. Now, while using the sunlight as a UV source should work just fine, I decided that it was time to build a proper UV exposure box. Winter is quickly approaching and I’m not too fond of the idea of having a variable-intensity light source (the sun) that would make the process (and end result) completely dependent on how good was my estimation of the time required to properly cure the paint given the weather of that particular day.

A UV Box would also allow me to experiment with UV-based transfer methods for the PCB etching process as well, so it was definitely time to build one.

UV Exposure Box. Closed.

Read More