Power supply for a DIY function generator kit

I love DIY/soldering kits, and thanks to online marketplaces like eBay I’ve been able to purchase and assemble a number of them for the past few months.

One of the last ones I got was a very basic but useful function/signal generator, whose only problem was that it required a power supply with +12V/+5V/-12V rails (it also arrived already assembled despite being sold as a DIY kit, which was disappointing in a way).

My firsts tests of the kit were with a PC power supply (the only source of -12V I had in my lab) until I got a “proper” alternative in the form of another kit, which is sometimes advertised as a “Hiland USB Dual Power Multiple Output Supply”. I will call it HL supply during this post (Mine says “Hyland” on the PCB, so assuming an original version exists mine is probably a cheap clone). This one actually required assembly (yay!) and worked fine in my limited tests, but it was still a hassle to have the two boards dangling around connected whenever I wanted to use the signal generator, so after some time I decided to make a (temporary) enclosure for the whole thing.

Read More

Arduino-powered Handheld Gaming Device

As a break from my regular activities I decided to spend a week designing and building something with parts and components I’ve purchased over the years but never had the chance to use in a project. This is the result:

A sort of portable gaming device powered by a really old AVR microprocessor.

I’ll try to walk you now through the things I used to design and build both the software and hardware of this device.

Read More